Best Live Center for Wood Lathes

Are you loooking for Best Live Center for Wood Lathes? If your answer is yes, then you’re in right place. Here, we listed Best Live Center for Wood Lathes after a lots of research. In case, if you’re in hurry this is the Best Live Center for Wood Lathes on Amazon

We spent 49 hours to find a best option for you and it’s a Live Tailstock Center with, which comes with all amazing features you ever want. It is the Best Live Center for Wood Lathes available in the market today. However, if you don’t want to spend big amount on Live Center for Wood Lathes, then you should go with DCT Heavy-Duty Live Tailstock which comes with all the basic options you could ever expect in Live Center for Wood Lathes.

After a good research, we have sort listed Best Live Center for Wood Lathes below.

Top 10 Best Live Center for Wood Lathes In 2021

1 1

Live Tailstock Center with

Check On Amazon
2 2

DCT Heavy-Duty Live Tailstock

Check On Amazon
3 3

Savannah Heavy Duty Dual

Check On Amazon
4 4

O’skool Heavy Duty 60

Check On Amazon
5 5

PSI Woodworking LCENTSS22 No.

Check On Amazon
6 6

Grizzly Industrial H3403 Cupped

Check On Amazon
7 7

Ginode Heavy Duty Live

Check On Amazon
8 8

PSI Woodworking LCENT4 Wood

Check On Amazon
9 9

MT2 Live Center Wood

Check On Amazon
10 10

PSI Woodworking LCENTLT2X Live

Check On Amazon

Top 10 Live Center for Wood Lathes

Are you looking for top 10 Live Center for Wood Lathes available right now in the market? Then check out below, we researched and short listed best one here.

1. Live Tailstock Center with


  • This type of action is great for turning because it keeps your wood from burning, yet it holds your stock in place. The live center allows for greater clamping pressures and much better control while still retaining their incredibly smooth rotation.
  • It is equipped with bearings that allow it rotate at low or high lathe speeds which allows the center to be used on projects as small as pens or as large as pepper mills.The tip or live center cone is at a common 60 degree angle and measures 1-9/32” in diameter.
  • This allows it to fit inside of pre-bored out holes that are smaller then the cone diameter. Works very well on projects like spindles, dowels, pepper mills and much much more.
  • ade from heavy duty steel for years of service. Available in MT1 and MT2 sizes which are both sold separately. Please check your lathes opening (Morse Taper) size. Morse Taper sizes vary from lathe to lathe. While the Morse Taper 2 size is more common, many of the smaller lathes today use the MT1 size. Please refer to your lathe owners manual for detailed information about your lathe.
  • 2. DCT Heavy-Duty Live Tailstock


  • EASY TO USE: Place rear taper end on the tail stock and the opposite end in the center drill hole; We recommend applying lubrication oil to bearing prior to each use (not included)
  • #1MT SIZE: Arbor works with any unit that has a #1 morse taper (1MT) tail stock; Check your machine’s user manual for the tail stock taper size to know if 1MT is the correct size for your application
  • BUILT TO LAST: Alloy steel shaft construction for ultimate strength and longevity that can easily handle a maximum 4,000 RPM and maximum 66-pound workpiece load
  • PROTECT & STORE CENTER: Comes in a transparent 4.5” x 1.5” x 1.5” inch (11.4cm x 3.8cm x 3.8cm) two-piece clear plastic protective covering case to ensure safety when not in use
  • 3. Savannah Heavy Duty Dual


  • A lot of wood turners don’t think about the live center that’s in their tailstock until it makes a funny noise, vibrates a little or even worse it seizes up and stops working altogether. In many instances, that funny noise or vibration leads to irritating marks or spirals in your project. This can typically be traced to play on a less than perfect factory lathe issued “live center”. The Precision Machined, Heavy Duty, Dual Bearing Live Center from Savannah addresses this issue and more!
  • Precision machined to exacting specifications, the Savannah HD Live Center is the ideal live center for novice and professional alike. With its super smooth design, heat sealed double bearings, 3-3/8″ bull nose cone, 60 degree full point cone and removable center spur point this live center is truly a tremendous value that was built to perform.
  • The High quality dual bearings are heat sealed and permanently lubricated to provide vibration free performance while turning and also provide you with years of dependable use. The live center is housed in a durable casing that is made from machined turned steel alloy and is coated with a black oxide finish.
  • This live center runs smooth and true during the turning process and may become your go to live center once you start using it. The Heavy Duty Dual Bearing Live Center Includes: a 3-3/8” bull nose reversible cone, 1-5/8” 60 degree full point cone, removable center spur point and a convenient knock out rod. This live center will work on lathes that accept Morse Taper 2 tail stocks.
  • The Heavy Duty Dual Bearing Live Center has a 3/4” x 10tpi thread which not only allows you to attach the included accessories, it also allows you to create many different types of turning jigs for offset turning. This gives you the ability to create wonderfully unique looking projects that are off center like asymmetrical pendants, candle stick holders and more! With the included accessories you can Turn bowls, platters, dowels, vases, spheres and more!
  • 4. O’skool Heavy Duty 60

    These 60 degree cone live centers are ideal for many turning projects and is a must have for woodturners.


  • Used for holding a workpiece with a hole from 1/8″(0.3175cm) to 1- 1/8″(2.8575cm) diameter
  • Perfect for pen turning mandrels
  • 60 degree point and ball bearing precision
  • Well balanced and smooth for effective turning
  • 5. PSI Woodworking LCENTSS22 No.

    Get a better bite on your spindle with PSI’s new 1′ Super Center.


  • Get a better bite on your spindle with more teeth for a strong grip while still providing equal pressure and a positive drive
  • Spring loaded point simplifies spindle centering and retracts to avoid spitting your work when tailstock pressure is applied
  • Ships in plastic production sleeves at 4.8-ounces
  • 4.5-by-1.5-by-1.5-inches with 1-inch crown
  • 6. Grizzly Industrial H3403 Cupped

    Cupped centers provide better grip and prevent splitting.


  • Package dimensions: 1.1″ x 4.1″ x 1.1″
  • Approximate weight: 0.25 lbs
  • 7. Ginode Heavy Duty Live

    ▲Specification: ● Material: 40Gr steel ● Color:silver ● Weight: 0.


  • ▲60-DEGREE POINT – Large live lathe center
  • ▲TURNS SMOOTHLY – Ball bearing precision.
  • ▲DIMENSION – Tail end diameter: 17.788mm.
  • ▲APPLICATION – Perfect for pen turning mandrels.
  • 8. PSI Woodworking LCENT4 Wood

    4 piece Center Set contains hard to find replacement centers for wood lathes equipped with a #2 MT headstock and tailstock.


  • Live tailstock Cup & Point Center
  • Dead headstock 1″ Spur Center for standard spindles
  • Dead headstock 5/8″ Spur Center for narrow spindles
  • Dead Hollow Center for drilling 5/16″ through hole
  • 9. MT2 Live Center Wood

    MT2 Live Center Wood Lathe Drive Spur Cup 4pcs Set With 2Pcs Extra Replacement Tips With Good Quality Wooden Box This MT#2 Lathe Center Set is all you need to start spindle turning on your wood lathe.


  • The set includes: 1pc 1/8″ dia. spur driver, 1pc 5/8″ dia. spur center, 1pc 5/8″ dia. cupped dead center 1pc liver center for smooth friction free turning
  • 1pc wooded case
  • 2pcs spare point(tips), Total with 4pcs point(tips)
  • 10. PSI Woodworking LCENTLT2X Live

    Fine tuned live center for all lathes equipped with #2 MT tailstocks.


  • #2 Morse taper arbor
  • Smooth Running ball bearings
  • Shipped in protective case for storage
  • Conclusion

    We did good research to find out top 10 Best Live Center for Wood Lathes to buy in 2021. For more similar product reviews, check out below or visit here.